Payment & Shipping Terms:
|Material:||High Carbon Steel Wire||Shape:||Flat|
|Loop Width:||24-26mm||Loop Height:||47-49mm|
Flat Antirust Treatment No Sag Springs , 3.8mm 27'' Upholstery No Sag Springs , Black
· Security: rigorous raw material control checks: "High Carbon Steel wire"
· Guarantee: increase the durability of your upholstery furniture
· High recirculation of the air: better stability and support of the weight.
Flat zigzag spring is straight shape.It's mostly used in chairs and car seat.
Zig Zag Springs General Guidelines
Furniture and Auto seat cushions: 9 Gauge
Furniture Seat Back: 11 Gauge
Auto Seat Back: 12 Gauge (or 11 gauge for heavier duty use)
|Name||Sofa zigzag spring|
|Material||82B or 70#|
|Wire Diameter||2.8mm - 4.0mm|
|Surface Treatment||Antirust treatment / zinc plating / chrome plating|
|Packing Way||300PCS / 500PCS per bag,packed with green knitted bag|
When measuring the required length, it is important to only measure the distance across the area to be bridged with the Serpentine Spring, and not allow for any bowing of the spring which may or may not be required. This measurement will make the difference between the spring fitting perfectly, or sagging or lifting of the cushion. So it needs to be right.
Another factor when using serpentine upholstery springs is the distance between the springs themselves across the chair (or couch). If the gap is too wide, then the cushion will have a tendency to fall down the oversized gap. Conversely, if the gap is too small it may end up either being too strong with little or no ‘spring action’ in it, or simply be too hard to comfortably sit on. Usually a couple of inches gap, (or 50mm) is perfectly adequate. When measuring, please do not allow for the arc, the inside frame measurement is the size required.
Juxing Spring manufactures Serpentine Chair Springs, Upholstery Springs, replacement springs and Serpentine Springs for furniture of all types.
Contact Person: Ms.Rae Chou